Here’s a few Toronto plumbing tips on extending supply lines

Doing a little work on the water services in your home? When you’re looking at running or extending copper supply lines, it’s a good idea to learn from the professionals. While there are other things the average DIYer can do themselves, some jobs require the expertise of Toronto plumbing tips from the ones that know the trade.

They know all the little tricks that will make the end product better. For example, these experts will use a ¾ spade bit to cut the holes in the studs and they know these need to be as close as possible to the center. Professionals will always remember to measure from the bottom of the stud so the holes are even.

Toronto plumbers experts who know their stuff will never forget to shut off the supply for the water lines they want to tap into. As well, they understand that running a supply line around a pipe or other obstruction means using 45º elbows. When you’re looking at doing some of the jobs that need to be done around the house by yourself, picking up a few tips from people who work with plumbing on a daily basis is always a good idea.

VN:F [1.9.20_1166]
Rating: 10.0/10 (1 vote cast)
VN:F [1.9.20_1166]
Rating: 0 (from 0 votes)

Common water heater issues

Although there are new advances all the time when it comes to the water heaters in your home, these essential parts of your water services do have problems now and again and knowing some quick fixes is a valuable way to keep the hot water flowing.

The temperature and pressure relief valve is an essential part of a water heater since this is a fail safe system that kicks in when a thermostat sticks and the temperature starts to climb in the tank. It’s a good idea to check this all important device once every six months or so.

Another common issue with this part of your Toronto plumbing services package is sediment accumulation in the tank. If you’ve got an issue with sand or rust in your water supply, the chances are you’re going to get accumulation in the tank. To remedy the situation, you need to flush as much as possible from the tank by connecting a host to the valve and draining all the water out.

Anode rods need to be watched as well. These work by sacrificing themselves to corrosion, helping to prevent rust in your water heater. When they work under normal circumstances, these generally take about four to five years to fail. You can find the anode rod screwed in at the top of the water heater.

 

 

 

 

 

 

 

 

VN:F [1.9.20_1166]
Rating: 10.0/10 (1 vote cast)
VN:F [1.9.20_1166]
Rating: 0 (from 0 votes)